ACS Se appliance upgrade to 5.2

[apanesar]

Hello

Does anybody know how to upgrade from ACS Se 1113 (running 4.2.0.124) to a new 1121 appliance running version 5.2. We also run RA for AD integration??

Thanks

Amerjit

[andamani]

Hi,

They are two different hardware. you cannot upgrade a hardware. Upgrade if software is possible tough. ACS SE 1113 does not support ACS 5.2.. you will have to purchase ACS SE 1121.

Hope this helps.

Regards,

Anisha

P.S.: Please mark this thread as resolved if you feel your query is resolved. Do rate halpful posts.

[apanesar]

Hi Anisha,

My mistake the question should have read ....

Does anybody know how to MIGRATE from ACS Se 1113 (running 4.2.0.124) to  a new 1121 appliance running version 5.2. We also run RA for AD  integration??

Thanks

Amerjit

[andamani]

Hi Amerjit,

I am sorry.. i still did not get it.. You will have to replace the SE 1113 by SE 1121.

You don't need RA in case of ACS 5.2. it binds directly to AD with an inbuilt RA.

The following link gives details of ACS 5.2 and AD integration.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/users_id_stores.html#wp1248491

Hope this helps.

Regards,

Anisha

P.S.: Please mark this thread as resolved if you feel your query is resolved. Do rate helpful posts.

[apanesar]

Hi Anisha, How do I migrate the configuration and DB from the fully operational old 1113 appliance to the new 1121 appliance?

Thx for info on the AD integration.

[andamani]

Hi,

The followinglink gives you detaisl fo migration from ACS 4.x to ACS 5.2

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/migration/guide/Migration_support.html

Hope this helps.

Regards,

Anisha

P.S.: Please mark this thread as  resolved if you feel your query is resolved. Do rate helpful posts