cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1510
Views
0
Helpful
2
Replies
Highlighted
Contributor

Add RADIUS IETF attribute to ISE System Dictionary

Hello

I'm looking to migrate an ACS5.4 config to ISE. Part of the ACS5.4 config involves:

  • define a RADIUE IETF attribute in the ACS RADIUS dictionary
  • inject this attribute into RADIUS requests that are proxied to another RADIUS server.

This works fine in ACS but I can't Add/Modify attributes in the ISE System RADIUS IETF dictionary. Is this functionality roadmapped for ISE?

Thanks

Andy

2 REPLIES 2
Highlighted
Contributor

Forgot to mention that I'm currently using ISE 1.1.3. I fround the following in the new ISE 1.2 documentation:

Cisco ISE also creates dictionary defaults for the IETF RADIUS set of attributes that are also a part of

the system-defined dictionaries, which are defined by the Internet Engineering Task Force (IETF). You

can edit all free IETF RADIUS attribute fields except the ID.

Cisco ISE also creates dictionary defaults for the IETF RADIUS set of attributes that are also a part of

the system-defined dictionaries, which are defined by the Internet Engineering Task Force (IETF). You

can edit all free IETF RADIUS attribute fields except the ID.

I'll upgrade and see if I can edit the attribute that I need.

Highlighted

ISE 1.2 can modify the Radius Vendors attributes (add, edit, delete), but can't modify IETF attributes.

I think ISE 1.1.x can do the same thing as ISE 1.2. I will check that tomorrow.

Please rate if this helps