cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
506
Views
0
Helpful
1
Replies

All guest users are gone after update ISE from 1.2 to 1.3

Martin Cristian
Level 1
Level 1

I have used this procedure http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/upgrade_guide/b_ise_upgrade_guide_13.html  to update ISE from 1.2.0.899 to 1.3 and after upgrade all my guest accounts were deleted. Guest DB is empty, zero users.

No information regarding this fact in update prerequisite.

Also there is no option to export guest users from ISE 1.2 and to import them in ISE 1.3!

Someone else has encountered this problem?

1 Reply 1

tonyp8581
Level 1
Level 1

Hi Martin, I've had the same issue.  Unfortunately, the upgrade does not keep Guest users.

Look here:

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/upgrade_guide/b_ise_upgrade_guide/b_ise_upgrade_guide_chapter_01.html

Disable services such as Guest, Profiler, Device Onboarding, and so on before upgrade and enable them after upgrade. Otherwise, you must add the guest users who are lost, and devices must be profiled and onboarded again.

For me, the instruction above wasn't an option.

 

Also, I had this behaviour confirmed by TAC

Fortunately, I didn't have many users, so I re-created and sent new password to all guest.

If recreating is not an option, TAC can send you a rootpatch with a script that will enable you to export Guest users and import following upgrade.

Hope it helps

 

Cheers !