07-01-2019 09:28 AM
Se solicita ayuda para autenticar y autorizar mediante Tacacs desde un Cisco ISE versión 2.4, equipos firewall Fortinet.
Las cuentas de usuario estar creadas en Cisco ISE. No se ha logrado que firewall Fortinet tome su autenticacion.
Solved! Go to Solution.
07-01-2019 01:54 PM
Using TACACS+ (Authentication and Authorization) for FortiGate access is what I found on the net. If you need more info than that, please contact Fortinent for support.
From ISE side, please ensure the firewall sending the requests to ISE by checking ISE TACACS Live Logs and/or performing a packet capture between the two. If the Live logs show some entries for these requests, look at the details and see why they not working.
07-01-2019 01:54 PM
Using TACACS+ (Authentication and Authorization) for FortiGate access is what I found on the net. If you need more info than that, please contact Fortinent for support.
From ISE side, please ensure the firewall sending the requests to ISE by checking ISE TACACS Live Logs and/or performing a packet capture between the two. If the Live logs show some entries for these requests, look at the details and see why they not working.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide