cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

333
Views
0
Helpful
1
Replies
juan.parra
Beginner

Autenticar firewall Fortinet (Tacacs) en Cisco ISE 2.4

Se solicita ayuda para autenticar y autorizar mediante Tacacs desde un Cisco ISE versión 2.4, equipos firewall Fortinet.

Las cuentas de usuario estar creadas en Cisco ISE. No se ha logrado que firewall Fortinet tome su autenticacion.

1 ACCEPTED SOLUTION

Accepted Solutions
hslai
Cisco Employee

Using TACACS+ (Authentication and Authorization) for FortiGate access is what I found on the net. If you need more info than that, please contact Fortinent for support.

From ISE side, please ensure the firewall sending the requests to ISE by checking ISE TACACS Live Logs and/or performing a packet capture between the two. If the Live logs show some entries for these requests, look at the details and see why they not working.

 

 

View solution in original post

1 REPLY 1
hslai
Cisco Employee

Using TACACS+ (Authentication and Authorization) for FortiGate access is what I found on the net. If you need more info than that, please contact Fortinent for support.

From ISE side, please ensure the firewall sending the requests to ISE by checking ISE TACACS Live Logs and/or performing a packet capture between the two. If the Live logs show some entries for these requests, look at the details and see why they not working.

 

 

View solution in original post

Content for Community-Ad