cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
cancel
868
Visitas
0
ÚTIL
4
Respuestas

Authorization Profile to redirect a wired MAB user to My Devices Portal

pacavell
Cisco Employee
Cisco Employee

Is it possible to create an authorization profile on ISE 2.4 that redirects the wired MAB employee user to the My Devices Portal? The intent would be to force the employee on a BYOD device to register that device before receiving appropriate network access. This is specifically a wired use case where the customer does not want to use 802.1x.

1 SOLUCIÓN ACEPTADA

Soluciones aceptadas

Jason Kunst
Cisco Employee
Cisco Employee
No. you wouldn’t redirect to my devices portal. That portal has no way to change access for the device after registration.

Here is the flow you would use
https://community.cisco.com/t5/security-blogs/ise-byod-registration-only-without-native-supplicant-or/ba-p/3099290


Ver la solución en mensaje original publicado

4 RESPUESTAS 4

Jason Kunst
Cisco Employee
Cisco Employee
No. you wouldn’t redirect to my devices portal. That portal has no way to change access for the device after registration.

Here is the flow you would use
https://community.cisco.com/t5/security-blogs/ise-byod-registration-only-without-native-supplicant-or/ba-p/3099290


Just to be sure, customer will be using only MAB for this wired access. 

Did you look at what was shared?

Yes I did and it seemed to fit my use case. I just wanted to make sure I didn’t misinterpret something. Thanks for the guidance.