Network Access Control

Can ACS 3.3 support nested groups within an external database (Active Directory)?For example, if I have map the AD group of Remote Users and that group is made up of groups New York and London, will it map correctly to Bob who is in the New York grou...

I have AAA configured to use Tacacs+ on a 7206VXR, when we telnet to the router and enter the user name and password it takes us to enable mode. When connected to the console it takes us to exec mode, then requires a passwrod to enter enable. Here ...

Could someone point me to a link for ACS install/config ? this is my first time. Is it very straight forward ? Thanks in advance.

Does anyone actually have this working ? Following the Cisco steps this will not work.

Hi,I want to use two ACS Servers, being able to synchronize permanently their internal user databases, so in case of failure, it would be transparent to the users.I think it is possible, but can you confirm it to me and could you give me an URL for t...

I seem to remember reading there was an issue with this but can't locate the reference. I want to receive accounting records on Administrative users on a PIX (6.3) on our ACS server just like for Switches, APs, etc. We do have TACACS authentication...

we have a wired 802.1x network with cat6500(Hybrid) and cat4000(SUPII). The authentication server is a IAS RADIUS server. So everthing is working fine but on the IAS we have a lot of failed attemps which are filling the log from a client (ab...). So ...

Is there a way to use ACS 3.0.3's csutil.exe text export capability to export data from ACS on Windows 2000, and then import it into Windows 2003 where ACS 3.3.2 has been installed? This would eliminate the need to do an interim upgrade and provide ...

To do EAP-TLS testing (without having to set up the certification authority server infrastructure ). I need Demo Certificates ( Client & Server ). I have tested the Cisco Certificates located at http://www.cisco.com/warp/public/cc/pd/sqsw/sq/tech/tce...

Please bear the long message. I think ultimately I have an ACS configuration problem.I am configuring a PIX 515 v6.3.3 to aaa authorize inbound SSH sessions to an inside host using ACS server 2.3. I am certain I have the PIX configured properly. I am...

I have two sites, each with a Pix501 running Pix 6.3.The two sites have a lan2lan tunnel with pre-shared key between them. Cisco vpn clients should be able to connect to either of the two sites - choice of site is depending on which site they need ac...

Have you had any experience w/ the following:Citrix Users accessing our Citrix Servers externally are first prompted w/ Firewall Authentication before authenticating on the Citrix Farm. If a user's password has expired he/she will be unable to authe...

Hi,I have applied 802.1x on Cat4500 and cat 3750 and i need to use Wake on LAn to load software on my Pc's.I what i have to config?Thanks

Where can one find the ACS-Windows Remote Agent download. ?