cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1577
Views
20
Helpful
3
Replies
Highlighted
Beginner

Blue coat proxy integration with ISE 2.4

Hello All,

 

We need to integrate Bluecoat proxy with ISE 2.4 for radius authentication and authorization has any one done the same can some one explain me the flow and what attributes should i match in ISE for the same

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hi Ranjit,

 

Please try this out.

Add Bluecoat Proxy under Radius Vendor in ISE Dictionary with vendor id 14501

Under dictionary attribute add 2 new attribute with

Attribute Name : Blue-Coat-Authorization

Data Type: UINT32

Direction: Both

ID: 2

Another attribute with Attribute Name: Blue-Coat-Group

Data Type: UINT32

Direction: Both

ID: 1

 

Under Authorization profile,use network device profile as Bluecoat,then in Advance attribute call the above 2 attributes as:

Blue-Coat-Authorization = 2
Blue-Coat-Group = 2 

https://community.cisco.com/t5/identity-services-engine-ise/bluecoat-proxy-ssg-300-25-administration-access-using-ise/m-p/3715526/highlight/true

-Aravind

View solution in original post

3 REPLIES 3
Highlighted

Hi Ranjit,

 

Please try this out.

Add Bluecoat Proxy under Radius Vendor in ISE Dictionary with vendor id 14501

Under dictionary attribute add 2 new attribute with

Attribute Name : Blue-Coat-Authorization

Data Type: UINT32

Direction: Both

ID: 2

Another attribute with Attribute Name: Blue-Coat-Group

Data Type: UINT32

Direction: Both

ID: 1

 

Under Authorization profile,use network device profile as Bluecoat,then in Advance attribute call the above 2 attributes as:

Blue-Coat-Authorization = 2
Blue-Coat-Group = 2 

https://community.cisco.com/t5/identity-services-engine-ise/bluecoat-proxy-ssg-300-25-administration-access-using-ise/m-p/3715526/highlight/true

-Aravind

View solution in original post

Highlighted

Hello Thanks a lot for reply

 

where to match shell privileges..

Highlighted

Privilege levels will be configured under authorization profile for Radius.

-Aravind