cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

819
Views
0
Helpful
3
Replies
forbesb
Beginner

Can't authenticate NT login over VPN.

Can't authenticate NT login over VPN using Cisco 3005. Tried MS VPN client and Cisco client and we cstill cannot authenticate to NT domain. Any ideas?

3 REPLIES 3
e.l
Beginner
Beginner

I have had this same problem before. We add the WINS servers parameter for the VPN client . Windows always uses WINS server for name resolution of its Primary Domain Controller. If it can not resolve the PDC Netbios name, it will try its cache, DNS. If all fail then it won`t be able to login to the Domain.

HTH

We have a Windows 2000 domain running in mixed mode. The client is running XP Pro. When we try to authenticate ,it appears as if it authenticates but we can't get to any of our network resources (such as mapping drives, connecting to printers etc.) We tried it from a Win98 client and the the network log in screen comes back after about a minute or two asking with the log in screen again. We can ping ip addresses on the network. I think we have a setting wrong on the concentrator but I haven't been able to find it.

Are you giving out the IP address of your W2K AD server as a DNS server on the concentrator?

Is DNS running on the W2K server?

Content for Community-Ad