cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2435
Views
0
Helpful
2
Replies

Can the Cisco Anyconnect Client be customized to remove the option Allow local (LAN) access when using VPN (if configured)

Grosser Roger
Level 1
Level 1

I would like the ability to remove or grey out options in the Anyconnect preference tab, specifically, "Allow local (LAN) access when using VPN (if configured)".

 

Is customizing the Anyconnect client in this way possible?

 

Thank you.

 

2 Accepted Solutions

Accepted Solutions

Mike.Cifelli
VIP Alumni
VIP Alumni

You can accomplish this via the AnyConnect Profile Editor.  See here for full detail as there are a few things that are required: https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/administration/guide/b_AnyConnect_Administrator_Guide_4-0/anyconnect-profile-editor.html#ID-1430-00000061

 

In the XML profile you can then reference the following XML tag:

<LocalLanAccess UserControllable="false">false</LocalLanAccess>

 

HTH!

View solution in original post

Grosser Roger
Level 1
Level 1

Thank you.  I will investigate this.  

View solution in original post

2 Replies 2

Mike.Cifelli
VIP Alumni
VIP Alumni

You can accomplish this via the AnyConnect Profile Editor.  See here for full detail as there are a few things that are required: https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/administration/guide/b_AnyConnect_Administrator_Guide_4-0/anyconnect-profile-editor.html#ID-1430-00000061

 

In the XML profile you can then reference the following XML tag:

<LocalLanAccess UserControllable="false">false</LocalLanAccess>

 

HTH!

Grosser Roger
Level 1
Level 1

Thank you.  I will investigate this.