cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1329
Views
0
Helpful
2
Replies
Roman Iskhakov
Beginner

cisco ACS server CSACS-1121 reinstall

How i can reinstall ACS server? It was new installation, after installation finished it could not work properly

ACS/admin# acs reset-config

  Stub Library could not be opened

*** libCARSAcsCtrlCli.so: cannot open shared object file: No such file or directory ***

ACS/admin# show application version acs

% Error finding version information for the application: acs

ACS/admin# show application

<name>          <Description>

empty screen

how i can reinstall it?

1 ACCEPTED SOLUTION

Accepted Solutions
mauzamor
Beginner

Hi there,

If you have the ACS 1121 appliance you will need the recovery DVD to reinstall the software this is available from the Cisco page:

Download software > Products > Security > Identity Management > Cisco Secure Access Control System > Cisco Secure Access Control System 5.3

This is the filename:

ACS_v5.3.0.40.iso

Here are the re-installation or reimage instructions:

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.3/installation/guide/csacs_ins.html#wp1101132

The command "acs reset-config" only removes the configuration from the ACS GUI, but it doesn't re-install the software.

Rate if it helps!

View solution in original post

2 REPLIES 2
mauzamor
Beginner

Hi there,

If you have the ACS 1121 appliance you will need the recovery DVD to reinstall the software this is available from the Cisco page:

Download software > Products > Security > Identity Management > Cisco Secure Access Control System > Cisco Secure Access Control System 5.3

This is the filename:

ACS_v5.3.0.40.iso

Here are the re-installation or reimage instructions:

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.3/installation/guide/csacs_ins.html#wp1101132

The command "acs reset-config" only removes the configuration from the ACS GUI, but it doesn't re-install the software.

Rate if it helps!

View solution in original post

Thank you for your reply, how i can understand this is only solution.

Content for Community-Ad