cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

4368
Views
5
Helpful
18
Replies
Highlighted
Beginner

Cisco Anyconnect & ISE behavior with Machine comes back from sleep mode

I have an ISE setup (Eap-chaining &  posturing ) for wired using Cisco Anyconnect 4.1 . I'm facing two issues with anyconnect , and hopefully some one can help me out ..

 

1- When machine moves from sleep mode to live  , ISE is not allowing users full access to network

Any connect shows it as connected  and system scan shows complaint  but user is not getting access  and he has to manually reconnect using any connect to get the services back

 

2-  anyconnect client keep showing as "updating requirements" for Long time sometimes 

Attached error “keep updating”

 

any hints?

18 REPLIES 18
Highlighted

We are also facing the same issue. Anyone has a fix for this ?

Highlighted
Beginner

Same here. Happens randomly. Windows native supplicant configured with machine authentication (EAP-TLS).

Highlighted
Beginner

Anyone have solution for this issue? I'm facing the same issue at user site without solution now.

Highlighted

Is there any solution for this issue?.

Content for Community-Ad