Cisco ISE 1.3 Patch 6 Procedure

[Mady]

Hi Team,

Please help me on installing patch on Cisco ISE version 1.3.0.876. I am planning to patch our ISE with HA set-up to patch 6. Does it also have an upgrade path? I've read that you must install the patch on the primary node then the secondary node will automatically upgrade to patch 6. What command will I run for me to verify that the secondary is upgrading to patch 6. Also, how long does it take to restart the application.

Thanks in advance!

Regards,

Mady

[nspasov · Accepted solution]

Hi Mady-

You can perform the install, rollback and check the status of the patch directly from the GUI on the primary Admin node. You can reference the Admin Guide for ISE 1.3:

Install Patch:

http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_0101.html#ID202

Check the status of the patch:

http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_0101.html#ID325

I hope this helps even though late :)

Thank you for rating helpful posts!

[Mady]

Hi Neno,

Thanks for the references.:)

[nspasov]

No problem! Now, if your query was resolved, you should mark the thread as "answered" :)