Showing results for 
Search instead for 
Did you mean: 
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.


Cisco ISE 2.1 & Cisco Anyconnect 4.X Issue with Windows 10 Client Posture

Hello All,

We are trying to do Posture on windows machines using ISE and Anyconnect ISE Posture Module with domain user login. But the posture is getting stuck at 10%.

While troubleshooting, we oberved below event in event viewer on windows endpoints.

The description for Event ID 259 from source aciseposture cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event: 

Function: open_logfile
Thread Id: 0x47B0
File: hs_log.c
Line: 1047
Level: error

Could not open the log file: The system cannot find the path specified.

Also, When we login with local user or Admin user, the posture scan gets completed and the endpoint gets full access.