Re: Cisco ISE 2.4 email alert

Nadia Bbz · ‎02-11-2021

Dear Teams ;

I configured email alerts for some alarms for a year everything works well , but now i do not receive any alarm

how can i send test email for ensure that's the smtp server work fine

thanks in advance

Marcelo Morais · ‎02-11-2021

Hi @Nadia Bbz

please take a look at:

1. Administration > System > Settings > SMTP Server.

Click the Test Connection button to check your configuration.

2. Administration > System > Settings > Alarm Settings

Check not only the Alarm Notification tab, but also a particular alarm configuration.

Hope this helps !!!

Nadia Bbz · ‎02-11-2021

Hi @Marcelo Morais

i haven't Test Connection button in version 2.4

i was also check Particular alarm configuration , i configured alarm notification since a year all work fine , but today i don't know why that's not work

martin.fischer · ‎02-11-2021

Hi @Nadia Bbz

There is a way to send a test email in 2.4 but its hidden really well.

Go to Work Centers > Guest Access > Portals & Components > Guest Types > Choose one of the available guest types and Edit. You will find the test button under Account Expiration Notification

Nadia Bbz · ‎02-11-2021

hi @martin.fischer

i tested the method in this link but i haven't receive any email

https://community.cisco.com/t5/security-documents/handy-tip-to-easily-test-smtp-functionality-in-ise/ta-p/3696623

martin.fischer · ‎02-11-2021

There are many reasons why this could fail. If you have access to your SMTP gateway then you might want to check the logs of the gateway. You could also create a TCP Dump on ISE, this might give a hint where the issue lies.

You can perform a TCP Dump under Operations > Troubleshoot > Diagnostic Tools > TCP Dump.

Add as filter ip host <ip-address-of-smtp-gateway>.

Nadia Bbz · ‎02-14-2021

hi @martin.fischer ;

thanks for your help

after using TCP DUMP , i get that i haven't enough system resources as picture attached , but in system summary i see that i have sufficient resources as show in attached