Cisco ise Nagios monitoring trought OID

[Fabio885]

Question 

I have a Cisco ISE 2.6 rel. and i need to monitor his cpu, ram and storage trought my NMS Nagios. 

i configured correctly snmp v3 on cisco ise and from nagios side it can be pinged or snmpwalk to see entire mib.

Are there oid that provide me data usage of cpu/ram? i cant find it..

Or mybe is there a specific plugin. 

Thank you for your help.

[balaji.bandi]

here is the guide :

https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_011000.html#id_17078

https://support.solarwinds.com/SuccessCenter/s/article/How-to-configure-Cisco-ISE-for-SNMPv3-traps?language=en_US

Good discussion thread will help you :

https://community.cisco.com/t5/network-access-control/monitor-ise-process-through-snmp/td-p/3718751

[thomas]

The snmp-server community section of the ISE CLI Guide lists the supported SNMP MIBs.

Does the HOST-RESOURCES-MIB not give you this data? That is the standard MIB for such things.

• SNMPv2-MIB
• RFC1213-MIB
• IF-MIB
• IP-MIB
• IP-FORWARD-MIB
• TCP-MIB
• UDP-MIB
• HOST-RESOURCES-MIB
• ENTITY-MIB-Only 3 MIB variables are supported on the ENTITY-MIB:
  • Product ID: entPhysicalModelName
  • Version ID: entPhysicalHardwareRev
  • Serial Number: entPhysicalSerialNumber
• DISMAN-EVENT-MIB
• NOTIFICATION-LOG-MIB
• CISCO-CDP-MIB