Cisco ISE SCCM with Non Cisco VPN Client

[cisco_sec_geek]

Hello Everyone,

I've 2 use cases for a client:

1. SCCM (Desktop Device Manager) integration with Cisco ISE and enforce critical patch check in compliance mode while connecting to the network at any Corporate Location.
Solution: This use case is straight forward and achievable.

2. Given most of the users are currently working from home and accessing the corporate network via VPN - Is there a way to enforce or integrate SCCM & ISE with Non-Cisco VPN Client  to ensure endpoints are compliant with critical patches?
Client are using non-Cisco VPN client and what I know so far is AnyConnect is the only VPN client that can talk to ISE, integrate and enforce (posture) policies on end devices based on their compliance status.

Thank you

[Mike.Cifelli]

AFAIK you are right.  Please take a look at the following for more detail to gain a better understanding: https://community.cisco.com/t5/security-documents/ise-posture-prescriptive-deployment-guide/ta-p/3680273