cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

741
Views
0
Helpful
1
Replies
nikolstep
Beginner

Cisco ISE SMS Gateway issue

good afternoon!

The problem most likely lies in the Cisco ISE sms gateway.

The operator for sending SMS is Megafon. He sent the HTTP Post settings. the documentation describes a secure HTTPS connection, and the authorization method on the operator's server is Authorization Basic.

We reviewed the sent packets with the built-in TCPDump program. it shows that the login-password data "Authorization Basic" is not created by the Cisco ISE system. authorization does not take place on the server side. This is confirmed by the telecom operator.

Please help me solve this problem.

Below are screenshots of the SMS Gateway settings and the operator's instructions.
 
4.png3.png1.png2.png
1 REPLY 1
Arne Bier
VIP Advisor

@nikolstep did you resolve this issue?  Is you ISE required to use the http proxy to get out to the internet (is it configured?) - I recall ages ago that I had issues with the way the ISE proxy code worked - authentication mostly didn't work well. We disabled authentication and whitelisted a bunch of things on the cutomer's proxy instead.

Content for Community-Ad