cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

379
Views
0
Helpful
3
Replies
David Boos
Beginner

Cisco ISE URL Redirect Update

I made a mistake configuring the domain-name on my ISE appliance.  I issued to the no ip domain-name and then added the domain-name I'd like to show up.  It seems to have partially worked, as the FQDN on the appliance is now correct but the redirect URL on my wireless LAN controller is still redirecting to the old domain. 

EX: WLC redirect: ise1.xyz.net

     ISE FQDN: ise1.abc.net

Any ideas on how to change that?

1 ACCEPTED SOLUTION

Accepted Solutions
jrabinow
Rising star

The FQDN is taken from the CN of the server certificate assigned for HTTPS

View solution in original post

3 REPLIES 3
jrabinow
Rising star

The FQDN is taken from the CN of the server certificate assigned for HTTPS

View solution in original post

Thank you that did it, appreciate your help.

vikasyad
Beginner

Although you have changed the  domain-name on the ISE appliance but still the output on WLC shows the  older domain for url redirect.The reason behind is that the domain  name(FQDN) which is present as the common name(CN) on the certificate of  the server is still the old-domain name.

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars


Miss a previous ISE webinar?
Never miss one again!

CiscoISE on YouTube