12-02-2016 02:21 PM - edited 03-11-2019 12:16 AM
Hi,
I have a situation where by a win workstation doesn't get authorised after a user logs in to the workstation.
After logging in and bouncing the port, the port gets authorized and an ACL is applied.
What could be the issue?
12-03-2016 02:29 AM
Hi,
Few questions
1) Is the workstation performing dot1x?
2) What is the version of ISE?
3) Is it a windows XP or 7 or some other version of OS?
Regards
Vivek
12-03-2016 03:25 AM
1) Is the workstation performing dot1x?
Yes - PEAP-MSCHAPv2
2) What is the version of ISE?
2.1 with latest patch 2
3) Is it a windows XP or 7 or some other version of OS?
Win 10 and Win 7
12-05-2016 11:24 PM
Hi,
This was the problem;
interface GigabitEthernetx/0/y
dot1x timeout ratelimit-period 300
This was added after following the best practice in the Cisco Live doc below;
https://www.ciscolive.com/anz2016/connect/sessionDetail.ww?SESSION_ID=4641
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: