cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

415
Views
0
Helpful
1
Replies
Tabish Mirza
Beginner

Cisco ISE with Flexconnect

Hi Folks,

Just want to know, how Cisco ISE works with WLC FlexConnect (AP deployed in FlexConnect Mode), if WLC goes down due to some reason. How users will get Authenticate, Authorize ? Does FlexConnect support all ISE features (like Posture, Profiling, CoA, CWA and etc) ?

1 REPLY 1
Marvin Rhoads
VIP Community Legend

In the absence of the WLC, new wireless users will not be authenticated or authorized. Existing sessions may continue and FlexConnect ACLs will remain in place.

With the WLC, all ISE features are supported (posture, profiling etc. as you asked). Without it, none of them can take place as they are all dependent on the WLC acting as the authenticator and policy enforcement point.

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars


Miss a previous ISE webinar?
Never miss one again!

CiscoISE on YouTube