cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

8912
Views
5
Helpful
15
Replies
rgreville666
Beginner

Cisco Prime Infrastructure and ISE Integration

Hi,

I'm current struggling to get PI and ISE to integrate, these are running:

  • ISE 1.3.0.876
  • PI 2.1.0.0.87

To integrate ISE with PI, on the PI server I browse to

Design > Management Tools >External Management Servers >   ISE Servers

I enter all the correct details but I get an error message:

Error: Identity Service Engine with IP Address XXX.XXX.XXX.XXX is not reachable. Please check the network connectivity of the Identity Services Engine.

Both devices are in the same subnet, there’s no filtering taking place. Both servers can see each other without an issue. From the CLI I can confirm I can see an ARP and can ping each other without issue. Both the CPI primary and ISE Primary server are located on the same ESX host.

Any ideas?????

15 REPLIES 15

Just to confirm, I have also moved the roles over but still seeing the same error..

HostPANMnTPSN
DC1 Server 1PRISEC 
DC2 Server 1SECPRI 
DC1 Server 2  YES
DC2 Server 2  YES

 

 

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars


Miss a previous ISE webinar?
Never miss one again!

CiscoISE on YouTube