12-13-2013 06:22 AM - edited 03-10-2019 09:11 PM
Hi to all
I want to remove the actual DNS servers:
Enter configuration commands, one per line. End with CNTL/Z.
acsbrou/admin(config)# ip name-server 192.168.1.103
% Name-server table is full; 192.168.1.103 not added
acsbrou/admin(config)#
Anyone nows how to clear the table?
Thanks
Solved! Go to Solution.
12-13-2013 06:30 AM
Hi Sebastian,
The List might already be full.
Try "no ip name-server" and then try adding the new ones.
**Share your knowledge. It’s a way to achieve immortality.
--Dalai Lama**
Please Rate if helpful.
Regards
Ed
12-13-2013 06:30 AM
Hi Sebastian,
The List might already be full.
Try "no ip name-server" and then try adding the new ones.
**Share your knowledge. It’s a way to achieve immortality.
--Dalai Lama**
Please Rate if helpful.
Regards
Ed
12-13-2013 06:32 AM
Your are the best! thanks a lot Ed.
Regards from LATAM!
Sebas
12-13-2013 07:15 AM
Hey Ed, Look at this:
This is the message when I try to add Active Directory:
Connection test to 'lan.vusecurity.com' failed.
Further information on status:
- Can not resolve network address
An this one when I try DNS from the console:
Trying "lan.vusecurity.com"
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 60888
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 4
;; QUESTION SECTION:
;lan.vusecurity.com. IN ANY
;; ANSWER SECTION:
lan.vusecurity.com. 3600 IN NS jerico.lan.vusecurity.com.
lan.vusecurity.com. 3600 IN SOA jerico.lan.vusecurity.com. hostmaster. 4 900 600 86400 3600
;; ADDITIONAL SECTION:
jerico.lan.vusecurity.com. 3600 IN A 192.168.1.137
jerico.lan.vusecurity.com. 3600 IN A 192.168.1.128
jerico.lan.vusecurity.com. 3600 IN A 192.168.1.103
jerico.lan.vusecurity.com. 3600 IN A 192.168.56.1
Received 167 bytes from 192.168.1.103#53 in 1 ms
Any ideas?
Sebas
12-13-2013 07:22 AM
Sometimes, this is due the ports in between that are not open or sometimes its a wrong test connection message.
Are you able to save configuration or does that give an error as well?
**Share your knowledge. It’s a way to achieve immortality.
--Dalai Lama**
Please Rate if helpful.
Regards
Ed
12-13-2013 07:25 AM
Thanks again,
Port are open, both ACS and AD are on the same LAN, inside the same VMware.
acsbrou/admin# Write memory
Generating configuration...
Writing configuration works ok.
¿?
12-13-2013 07:30 AM
What do you get when you perform save configuration?
**Share your knowledge. It’s a way to achieve immortality.
--Dalai Lama**
Please Rate if helpful.
Regards
Ed
12-13-2013 07:32 AM
you mean with "write memory"?
Generating configuration...
Thats all
12-13-2013 08:07 AM
Not exactly, I mean the save changes button on the AD configuration page.
**Share your knowledge. It’s a way to achieve immortality.
--Dalai Lama**
Please Rate if helpful.
Regards
Ed
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: