Force or automatic client SSID switching

[aka000000]

In ISE 2.0, does it have ability to force a authenticated guest to switch to a different and hidden SSID?

Specifically, a guest user connects to a open SSID and authenticates via CWA using their AD account or sponsor created account, then ISE force it to a hidden guest SSID automatically. Is this possible? or the user need to re-associate to the guest SSID manually?

[Jatin Katyal]

after reading your post this is the only thing came to my mind with ISE. If you are talking about DUAL SSID wireless byod self registration the please look at the document. With DUAL SSID, user has to manually disconnect and reconnect.

http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_61_byod_provisioning.pdf

HTH

~ Jatin

[Leo Laohoo]

ISE supports 802.1x and VLAN Switching so, try this:  Configure multiple dynamic interface (and none of them is "attached" to an SSID).  On the SSID, enable "AAA Override".