cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

887
Views
0
Helpful
4
Replies
tmatzeu12
Beginner

Hardware upgrade from 3495 to 3595

Hello guys,

My customer wants to perform a hardware upgrade from 3495 to 3595 (PAN + MnT), version 2.0.1.

Can I backup the config from the 3495 and restore it to the 3595?

Thanks,

Thomas.

1 ACCEPTED SOLUTION

Accepted Solutions
Timothy Abbott
Cisco Employee

Hi Thomas,

Yes, you can.  Please see the Back up and Restore Operations section of the admin guide for instructions on how to do it.

Cisco Identity Services Engine Administrator Guide, Release 2.0 - Backup and Restore Operations [Cisco Identity Service…

Regards,

-Tim

View solution in original post

4 REPLIES 4
Timothy Abbott
Cisco Employee

Hi Thomas,

Yes, you can.  Please see the Back up and Restore Operations section of the admin guide for instructions on how to do it.

Cisco Identity Services Engine Administrator Guide, Release 2.0 - Backup and Restore Operations [Cisco Identity Service…

Regards,

-Tim

View solution in original post

Thanks Tim!

Charlie Moreton
Cisco Employee

Yes, you can.  Two important things to remember:

A regular backup does not contain the Certificate Store and Private Keys.  Follow the steps at the link below to back these up and then restore them on the new Appliance:

Export Certificates and Private Keys

You can re-host your licenses onto the new SNS-3595 appliances quickly and easily.  Follow the steps here:

Re-Host Licenses

Though these steps only need to be completed on the Primary Admin Node (PAN), you need the UDI information from the Secondary Admin Node to properly Re-Host the Licenses.

Thanks Charles!

Content for Community-Ad