cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

336
Views
0
Helpful
1
Replies
Highlighted
Beginner

High CPU Alarm

Hi all,

I have 2 ISE. First is Primary for Admin and Monitoring. Other services such as Identity, SXP, Profiler etc are enabled on both of them. Switches and WLC point for first one as first authentication server however only 50-60 active clients so far. Both of them are physical servers.

Last 2 weeks I started to get regular (with 1 or 2 hours interval) alarms telling:

The ISE system is experiencing high load average.The load average number represents the average system load over a 5-minute period.A load average of 8.00 is 100% CPU utilization on 8-core box. This alarm will be triggered when the load average is above the number of processors available on your system.

 

I am not sure but I think dot1x session should not be a problem because I do not have a lot of active clients. From SXP side second PSN is used.

Capture.PNG

Any help is appreciated.

 

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: High CPU Alarm

That is pretty high for your environment. I suggest opening a TAC SR to investigate.

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Re: High CPU Alarm

That is pretty high for your environment. I suggest opening a TAC SR to investigate.

View solution in original post

This widget could not be displayed.