cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

258
Views
0
Helpful
1
Replies
Highlighted
Beginner

How to check "aaa group server radius dot1x" details in ISE

Hi,

 

May I know where in the ISE can I check the details for dot1x-1 and dot1x-2 such as IP address, port number and key?

 

aaa group server radius dot1x
server name dot1x-1
server name dot1x-2
!
radius server dot1x-1
address ipv4 x.x.x.x auth-port 1812 acct-port 1813
automate-tester username dummy probe-on
key fkduhjdahsfas

Everyone's tags (1)
1 REPLY 1
Highlighted
VIP Collaborator

Re: How to check "aaa group server radius dot1x" details in ISE

The radius settings for a specific NAD get configured and assigned here: Administration->Network Resources->Network Devices. You add the NADs that will use ISE for certain purposes such as radius, trustsec, tacacs+, etc. there. Edit one of the NADs you create and go to the RADIUS Authentication Settings. This is where you configure unique settings. As for the RADIUS protocol ports go here: Administration->System->Settings->Protocols->RADIUS->UDP Ports. Lastly, you can get the ISE IPs via CLI (show int g 0; show int g 1; etc.).  HTH!