cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
556
Views
2
Helpful
2
Replies

How to remove Meraki MDM

JWfromMO
Level 1
Level 1

We have a Meraki network that has been passed down from admin to admin.  I've noticed that in ours we have MDM set up and running.  We don't use Meraki for our MDM.  I'd like to know if I can delete that "network" without causing a lot of trouble.  We mainly use Intune at this point and no system relies on the Meraki MDM.

2 Accepted Solutions

Accepted Solutions

Greg Gibbs
Cisco Employee
Cisco Employee

This Community space is intended for discussions related to Cisco ISE and NAC solutions. Your question would be better posted to the Meraki Community.

View solution in original post

thomas
Cisco Employee
Cisco Employee

This is more of a question for the Cisco Meraki Community but even then you will need to be more specific about what "network" you are talking about. I have never needed to apply Meraki System Manager to a Meraki Network.

thomas_1-1698695432330.png

The Network Locations above refer to IP/CIDR networks for applying policies with GeoFencing - not Meraki Networks.

You will need to be clear in your question to the Meraki Community about which "networks" you are referrering to.

 

 

View solution in original post

2 Replies 2

Greg Gibbs
Cisco Employee
Cisco Employee

This Community space is intended for discussions related to Cisco ISE and NAC solutions. Your question would be better posted to the Meraki Community.

thomas
Cisco Employee
Cisco Employee

This is more of a question for the Cisco Meraki Community but even then you will need to be more specific about what "network" you are talking about. I have never needed to apply Meraki System Manager to a Meraki Network.

thomas_1-1698695432330.png

The Network Locations above refer to IP/CIDR networks for applying policies with GeoFencing - not Meraki Networks.

You will need to be clear in your question to the Meraki Community about which "networks" you are referrering to.