02-27-2017 02:24 AM - edited 03-11-2019 12:30 AM
pls explain below client site command, also provide basic standard policy for tacacs and configuration for AD connectivity
we have used:
ACS Version 5.5
Windows R2 2008
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable /* this "enable" word mening
aaa authorization exec default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting commands 15 default start-stop group tacacs+
tacacs-server host <Server ip example10.22.121.5> key <Example C@takbC05 >
tacacs-server host <Server ip example10.22.121.5> key <Example C@takbC05 >
tacacs-server directed-request
ip tacacs source-interface <LAN-Int>
03-03-2017 12:51 AM
Pls reply...
03-03-2017 02:43 AM
Hi,
For AD integration with ACS, you can refer to the following configuration example:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113571-acs5-ad-int-config-00.html
Regards,
Kush
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: