Integrate windows Active Directory

[estelamathew]

Hello friends,

How we can integrate windows active directory in ACS any link or book which can help me.

Message was edited by: estela mathew

[estelamathew]

Can anybody link me to proper document.

[Jatin Katyal]

Hi,

I'm assuming that you have ACS version 4.x. Please go through the attached document for ACS and AD integration. In case you have ACS version 5.x then please let me know, I'll send you steps for that as well.

Regards,

JK

Do rate helpful posts-

[Joseph Dworak]

If you could provide the 5.x doc for me I would appreciate it.

[Kent Heide]

If you just grab the 5.x user guide from CCO (which is found by a quick search):

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wpxref47466

[Jatin Katyal]

Joseph,

There is no specific document for ACS 5.x out yet. However, below listed links covers everything whatever you needed.

Joining ACS to an AD Domain
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1140906

ACS 5.1 has to be configured with a valid NTP server for time synchronization, preferably from where the domain controller is syncing its time. Another one is a valid DNS server which can resolve internal  names.

Both of them will be configured from the CLI:
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_use.html#wp1096003

ip name-server
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1729536

Ntp server
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1013780

HTH

JK

Plz rate helpful posts-