03-22-2014 06:02 AM - edited 03-10-2019 09:33 PM
Hi All,
I have taken backup on ISE version 1.0.4 application data. When I am restoring it on 1.1.0, it says as below
7 [13168]: backup-restore:history: br_history.c[310] [admin]: added record to history
% The backup file decryption failed. Ensure that you are providing password used at the time of backup.
6 [13168]: backup-restore:restore: br_cli.c[843] [admin]: error message: The backup file decryption failed. Ensure that you are providing password used at the time of backup.
But there is no password I have specified when taking backup in 1.0.4. Can anyone please advise if I am missing something?
Thanks
03-23-2014 02:09 PM
What command are you using to restore the application backup?
To restore the application data, from the Cisco ISE CLI, enter:
restore backupfilename.tar.gpg repository repositoryname application ise
For more info:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-0-4/user_guide/ise104_user_guide/ise10_backup.html#wp1053926
Hope this helps.
Regards,
Jatin Katyal
*Do rate helpful posts*
03-24-2014 03:12 AM
make sure the passwrod you provided is the same password which you used as this error is for decrypting key
03-31-2014 04:33 AM
please check: We recommend that you do not change the system timezone after the initial ISE installation and setup.
http://www.cisco.com/c/en/us/td/docs/security/ise/1-1/user_guide/ise11_user_guide/ise_backup.html#wp1053926
05-02-2014 07:21 AM
you need to enter a encryption key when you create a back up
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide