11-12-2014 10:58 AM - edited 03-10-2019 10:10 PM
Hello all, just curious. I see in the release notes for ISE 1.2.X that support for Mac OS 10.10 (Yosemite) was available via patch 12 on the ISE1.2.0 train of code. That said, I see nothing in the release notes stating any support for Yosemite for any of the patches for ISE1.2.1, the latest being patch 3 released 1 week after ISE 1.2.0 patch 12. Can anyone please advise if Yosemite is in fact supported on 1.2.1 with patch 3??
Thank you very much in advance for your help
Jeff
Solved! Go to Solution.
11-19-2014 05:29 AM
Jeff,
OS X 10.10 is supported in ISE 1.2 p11, 1.2.1 p2 and 1.3.
Patch 12 for 1.2 and Patch 3 for 1.2.1 fix other issues for OS X 10.10, and I recommend updating to the latest patches for these fixes.
Here is the entry in the Release Notes detailing the fix for 10.10 in 1.2 p 12:
MacOsXAgent versrion 4.9.5.3 should be used and MacOsXSPWizard 1.0.0.30
Note that the description for these files denote ISE 1.2 Patch 11/12, ISE 1.3 release and above. ISE 1.2.1 is not mentioned, but follows the bug fix/release schedule for 1.2, with an adjustment.
1.2 patch 10 = 1.2.1 patch 1
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
11-12-2014 12:31 PM
i've got yosemite clients running wired and wireless with ISE 1.2 (not 1.2.1) patch 10 and they work okay. we're using agent 4.5.9.3 compliance 3.6.9186.2
11-19-2014 02:42 AM
Mac OS X 10.10 is supported in ISE 1.3 ..try to upgrade to ISE l.3 if you can
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/release_notes/ise13_rn.html#pgfId-538562
11-19-2014 05:29 AM
Jeff,
OS X 10.10 is supported in ISE 1.2 p11, 1.2.1 p2 and 1.3.
Patch 12 for 1.2 and Patch 3 for 1.2.1 fix other issues for OS X 10.10, and I recommend updating to the latest patches for these fixes.
Here is the entry in the Release Notes detailing the fix for 10.10 in 1.2 p 12:
MacOsXAgent versrion 4.9.5.3 should be used and MacOsXSPWizard 1.0.0.30
Note that the description for these files denote ISE 1.2 Patch 11/12, ISE 1.3 release and above. ISE 1.2.1 is not mentioned, but follows the bug fix/release schedule for 1.2, with an adjustment.
1.2 patch 10 = 1.2.1 patch 1
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
11-19-2014 06:24 AM
Great info, thank you for sharing. We are going to upgrade to 1.2.1 and then immediately patch it up to patch level 3, so we will be covered. thanks for pointing out how the patch numbering lines up between 1.2 and 1.2.1 - that clears a lot up for me.
As for the upgrade to 1.3, we are going to plan that out for Q1. We are slow to adopt :)
Jeff
10-07-2015 07:59 AM
hi Jeff,
We are currently using ISE 1.2.1.198 and we are observing NAC agent issue with Yosemite version 10.10..
Issue: Nac agent pops up suddenly and wifi disconnect. Posture continues, when it find complaint, users gets connected to wifi.
Can you please check and let me know the compatability.
NAC Agent Version: 4.9.5.3 with complaince mod ver: 3.6.9.186.2
ISE Version: 1.2.1.198
MAC OS: 10.10.5 (Yosemite)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide