cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
468
Views
0
Helpful
1
Replies

ISE 1.2 with MDM intergration

jiyoung Kim
Beginner
Beginner

                   Hi, I'm trying to intergrate with Zen MDM.

has anyone seen this issue ?

there is no mdm policy to configure in ISE, as I know, but it keeps me to redirect to that page.

I already added MDM server in administration -> network resources -> MDM

and when I ping and nslookup, i can successfully ping and lookup the ip address of mdm.

Thank you.

1 Reply 1

Charlie Moreton
Cisco Employee
Cisco Employee

jiyoung,

There are ACLs to be created on the WLC, Authorization Policies and Profiles on the ISE.

For a good understanding of what needs to be done to get this fully configured, go here:

http://wikicentral.cisco.com/display/VTANDGOLD/ISE+1.2

and choose the GOLDlab: ISE 1.2 - BYOD-MDM Lab on the right side for Partner Education.

If you cannot log in, your Account Manager can get you access.  This is a really thorough walk-through of configuring the ISE to connect with a third-party MDM server and it lets you do all the configuration.

Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.

Charles Moreton

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: