10-23-2019 12:28 AM
Hi all,
I've correctly configured under Guest Type everything related to. I get email notification as configured (11 hours before guest account expiration) but the body message is not the same to the one I've configured under messages field on Guest Type section.
Solved! Go to Solution.
10-25-2019 01:11 AM - edited 10-25-2019 01:15 AM
You’re running ISE 2.1? This is old and not supported. I would recommend moving to recommended release of ISE 2.4 or at least 2.2 which have lots of guest fixes
otherwise we can try but if bug not going to be resolved here. send us screenshots of your config and your output
10-25-2019 02:19 AM
10-25-2019 01:11 AM - edited 10-25-2019 01:15 AM
You’re running ISE 2.1? This is old and not supported. I would recommend moving to recommended release of ISE 2.4 or at least 2.2 which have lots of guest fixes
otherwise we can try but if bug not going to be resolved here. send us screenshots of your config and your output
10-25-2019 02:14 AM
Hi Jason,
we would migrate to a new ISE 2.4 hopefully by the end of this year, but we are not confident about timing so we have to troubleshoot it.
I've a TAC open on this, in according to TAC eng we have reboot the node without any effect.
As a test, I've set my guest account expiration 12 hours before and and I got the attached mail. It correctly send mail 11 hours before account exp as configured on guest type page but the message sent is the previous one. I've change that message approximately in July.
10-25-2019 02:19 AM
10-25-2019 02:50 AM
Ok, I let you know.
However I'm trying to get out of this with a copy of guest type
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide