cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
884
Views
1
Helpful
3
Replies

ISE 2.2 VM on hyper-V RAM upgrade SR:682494376

depillsb
Cisco Employee
Cisco Employee

Hey Team,

I have a customer facing an issue with upgrading the RAM from 8GB to 16GB on an ISE 2.2 VM running on microsoft Hyper-V.

When the customer attempts the upgrade ISE does not boot.

SR: 682494376

Is there documentation stating that upgrading the RAM on an ISE VM is not supported?

Thanks,

Deon

1 Accepted Solution

Accepted Solutions

Timothy Abbott
Cisco Employee
Cisco Employee

Upgrading the RAM on an ISE VM is supported in 2.2.  I've tested this in my lab.

Regards,

-Tim

View solution in original post

3 Replies 3

Timothy Abbott
Cisco Employee
Cisco Employee

Upgrading the RAM on an ISE VM is supported in 2.2.  I've tested this in my lab.

Regards,

-Tim

Hey Tim,

Which virtualization environment did you test this on? (Hyper-V , VMware, etc..)

Thanks,

Deon

Hi Deon,

My test was on VMware so I suppose it could be something specific with Hyper-V.  At any rate, increasing the RAM of an ISE VM is supported.

Regards,

-Tim

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: