cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3725
Views
10
Helpful
11
Replies

ISE 2.4 support on SNS 3600 Series

mdubec
Level 1
Level 1

Hi,


will be ISE 2.4 version supported on SNS 3600 Series Aplliances?


Thanks


Michal

1 Accepted Solution

Accepted Solutions

peter.matuska1
Level 1
Level 1

Hi,

2.4 is supported on SNS-36x5 appliances. See the modified ISO in the download section of ISE 2.4. Once installed you will need to apply patch 9.

View solution in original post

11 Replies 11

Damien Miller
VIP Alumni
VIP Alumni
At the moment no, it's been a hot topic. The current recommendation is to provide the feeedback to the ISE PM. Maybe with enough interest they will look at certifying it. http://cs.co/ise-feedback

https://community.cisco.com/t5/identity-services-engine-ise/sns36xx-appliances-support-in-ise-2-4/m-p/3806716/highlight/true#M24039

Thank you for your help.
Michal

Jason Kunst
Cisco Employee
Cisco Employee

Guys, Does this not answer the question,  software version 2.4 is supported on SNS-3600.

 

ISE_2.4.PNG

 

ISE_2.6.PNG

 

So what I was told more recently is that in order for 2.4 to run on the SNS-3600's, it requires a new ISO with additional drivers. That's all the public information we have. Seeing as there has been no new special 2.4 ISO released, it's still not supported and won't run on the SNS 3600's. It's still a hot topic.

2.6 will run fine on the SNS 3500's, but not the other way around. I suspect that was just a typo in the 2.4 section.

 

 - No ; scrutinizing the page does not confirm your claim.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

peter.matuska1
Level 1
Level 1

Hi,

2.4 is supported on SNS-36x5 appliances. See the modified ISO in the download section of ISE 2.4. Once installed you will need to apply patch 9.

Thanks, peter.matuska1, for updating this thread.

Yes, we just published the new ISO to provide this support.

In SNS3615 can it support ISE 2.3?

No it is not. AFAIK there are no plans for supporting it either.

Surendra
Cisco Employee
Cisco Employee
There is new ISO posted on CCO for 2.4 to support 36XX series appliances and you will have to install patch 9 on top if it. Older patches will not work with that ISO.