04-12-2020 03:52 AM
Hello,
Cisco ISE 2.7 cannot create and edit authorization policy, it is halted on conditions step.
Fetching data from server...
What the best way to fix this?
It is not possible now to open the case in TAC.
Thank you.
Solved! Go to Solution.
04-15-2020 06:04 PM
Hi,
backup
application reset-config ise
restore
And issue was fixed.
Thanks.
04-12-2020 09:12 AM
- Verify current health-status on the involved admin-node with :
show application status ise
If errors are listed , stop and re-start ise with application stop ise followed by application start ise Afterwards check the health-status of ISE again, with the initial command given.
M.
04-12-2020 09:40 AM - edited 04-12-2020 09:45 AM
Hi,
ISE 2.7 Services in Node
all app in stack working good and i already reboot/reload system.
( Cisco ISE 2.7.0.356 with patch 1, one and only node, small vm )
04-12-2020 09:57 AM
- Check your vm's resources (CPU. memory, disk space!) not only 'locally; (from the viewpoint of the vm), but also from the managerial hyper-visor environment.
M.
04-12-2020 10:59 AM
Hi,
hypervisor resources (CPU, Memory and Storage) are good and no overloaded, its monitoring automatically and i check it especially for this case (manually).
Thank you.
04-12-2020 11:02 AM
- On ISE node issue show disk ; check if no partitions are full.
M.
04-12-2020 11:06 AM
Hi,
"all internal filesystems have sufficient free space"
Thank you.
04-13-2020 01:24 AM
If services running properly and all resources good, May be try using different browser (Chrome>/Firefox) in Private mode.
04-13-2020 01:57 AM
- Also if you would have some intranet fire-walling solution(s) in place between your browser (/terminal) and the ISE infrastructure then make sure some ISE-application traffic does not get blocked inadvertently.
M.
04-13-2020 04:09 PM - edited 04-13-2020 04:16 PM
Hi,
after 12 hours authorization policy editor work good (without any actions), but system use old policy with new one.
Live Logs
"Wired" is old name of policy, "Wired ONE" new name. "Profiled Workstations" none existed (deleted) rule.
Thanks.
04-15-2020 06:04 PM
Hi,
backup
application reset-config ise
restore
And issue was fixed.
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide