cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

190
Views
5
Helpful
2
Replies
Highlighted

ISE 2.7 Network Devices export/ Blank CSV

Hello team,

 

We are facing this weird issue.

When we are trying to export network devices standalone/group/all, we are getting a blank csv.

We are currently using ise version 2.7 patch 1.

We tried using different browsers, same result.

We tried to import a test device, we managed to export it alone but when we try to export all we are not even getting the test one.

The account we use has admin rights.

These network devices were added via restore of a configuration backup. Maybe that caused the issue?

Any suggestions? 

2 REPLIES 2
Highlighted
Cisco Employee

Re: ISE 2.7 Network Devices export/ Blank CSV

Hello,

 

Please confirm if your NADs are configured with description or not.

If not, can you please perhaps add description to few NADs and see if you are able to export them?

 

There were few issues reported where patch 2 resolved the issue so you can try that as well.

 

Thanks,

Dinesh Moudgil

 

P.S. Please rate helpful posts.

Highlighted

Re: ISE 2.7 Network Devices export/ Blank CSV

Hello Dinesh

 

thank you for your answer.

I will try what you proposed and i will update the post as soon as i have any results.

 

Best regards

Chrysostomos Tzouros