09-09-2016 06:26 AM
Hello,
we are working on a customer PoC where we need to use an extreme switch (X440), does anyone has any axperience with it?
We are having some serious issue in configuring dot1x and MAB on it.
Also, we would like to work on the SNMP CoA and might use some help on doing it for the first time.
Thanks a lot
Francesca
Solved! Go to Solution.
09-09-2016 11:40 AM
Hopefully this helps: https://packetfence.org/doc/PacketFence_Network_Devices_Configuration_Guide.html#_extreme_networks
If able to get a packet capture or else TCP dump from PSN, then can review specific fields used to set MAC auth and 802.1X flows. This can then be configured into a custom NAD profile. RADIUS dictionaries can typically be accessed from freeRADIUS and imported directly into ISE.
Craig
09-09-2016 11:40 AM
Hopefully this helps: https://packetfence.org/doc/PacketFence_Network_Devices_Configuration_Guide.html#_extreme_networks
If able to get a packet capture or else TCP dump from PSN, then can review specific fields used to set MAC auth and 802.1X flows. This can then be configured into a custom NAD profile. RADIUS dictionaries can typically be accessed from freeRADIUS and imported directly into ISE.
Craig
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: