cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

283
Views
5
Helpful
4
Replies
Beginner

ISE and WLC 5520 MAB issue

Hi all,

i am implementing 2 new WLC 5520 with MAB authentication on a SSID.

Once that the client join to the SSID i am get authentication portal but after success login, MAC is on the correct ISE endpoint but i am unable to connect to the SSID.

Same procedure with WLC 5508 is working fine.

Is there some different parameters betweewn WLC 5520 and 5508 on ISE?

Both WLCs have same configuration.

Thanks

Marco

4 REPLIES 4
Highlighted
Cisco Employee

Hi Marco-

Hi Marco-

- What version of code are you running on the 5508?

- What version of code are you running on the 5520?

Thank you for rating helpful posts! 

Highlighted
Beginner

Hello neno,

Hello neno,

it was ACL issue.

Thanks

Marco

Highlighted
Cisco Employee

That is great Marco! Glad you

That is great Marco! Glad you were able to solve your issue! Also, thank you for taking the time to come back and post the solution here (+5 from me)

Now since your issue is resolved, you should mark the thread as answered :)

Highlighted
Cisco Employee

Re: ISE and WLC 5520 MAB issue

Hi,

 

where we can add endpoint in ISE.

 

I configured SSID with non security in WLC with adding ISE.

 

but SSID is dropping.

Issue should be resolve after adding client mac address added in ISE.

 

suggest me...

 

Thanks,

Basavaraj