ISE and WLC 5520 MAB issue

[Marco Aresu]

Hi all,

i am implementing 2 new WLC 5520 with MAB authentication on a SSID.

Once that the client join to the SSID i am get authentication portal but after success login, MAC is on the correct ISE endpoint but i am unable to connect to the SSID.

Same procedure with WLC 5508 is working fine.

Is there some different parameters betweewn WLC 5520 and 5508 on ISE?

Both WLCs have same configuration.

Thanks

Marco

[nspasov]

Hi Marco-

- What version of code are you running on the 5508?

- What version of code are you running on the 5520?

Thank you for rating helpful posts! 

[Marco Aresu]

Hello neno,

it was ACL issue.

Thanks

Marco

[nspasov]

That is great Marco! Glad you were able to solve your issue! Also, thank you for taking the time to come back and post the solution here (+5 from me)

Now since your issue is resolved, you should mark the thread as answered :)

[banuhous]

Hi,

where we can add endpoint in ISE.

I configured SSID with non security in WLC with adding ISE.

but SSID is dropping.

Issue should be resolve after adding client mac address added in ISE.

suggest me...

Thanks,

Basavaraj