This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
i am implementing 2 new WLC 5520 with MAB authentication on a SSID.
Once that the client join to the SSID i am get authentication portal but after success login, MAC is on the correct ISE endpoint but i am unable to connect to the SSID.
Same procedure with WLC 5508 is working fine.
Is there some different parameters betweewn WLC 5520 and 5508 on ISE?
Both WLCs have same configuration.
That is great Marco! Glad you were able to solve your issue! Also, thank you for taking the time to come back and post the solution here (+5 from me)
Now since your issue is resolved, you should mark the thread as answered :)
where we can add endpoint in ISE.
I configured SSID with non security in WLC with adding ISE.
but SSID is dropping.
Issue should be resolve after adding client mac address added in ISE.