ISE Appliance Decommission/Wipe

[prathapss]

Hi,

We have an old ISE appliance and we would like to decommission that and do the complete wipe.

We are unable to use the utility tool which does the factory reset.

I see that the command application reset-config ise does the policy database wipe.

What all information will be there after executing this command?

Is there any other way to do the wipe? (Either on the physical appliance or through CLI)

Thanks

[balaji.bandi]

You really want to sure all the data need to be wiped, then do a re-image so all wiped and not recoverable.

https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/install_guide/b_ise_InstallationGuide24/b_ise_InstallationGuide24_chapter_011.html#id_70768

[prathapss]

Currently we cannot do that.

Any other way?

[Greg Gibbs]

See a similar discussion here - Wipeout everything on the Cisco SNS-3495 running ISE 2.2 patch 14