05-24-2021 01:28 AM - edited 05-24-2021 01:31 AM
Hi,
we have two node deployment of cisco ISE. We usually face power disruption in our data center and because of that servers and appliances reboot. we have noticed that cisco ISE and other cisco appliances like WLC, collaboration appliances, go to standby mode (power LED color changes to amber) once the power is back and the appliances reboot. we have to manually power on the appliance by pressing the power button. we need your support to suggest us the solution so that the ISE appliances reboot to fully functional and do not go to power standby mode once reboots due to power failure.
Solved! Go to Solution.
05-24-2021 04:36 AM
Hi @s.rashid ,
as @Leo Laohoo said ... please take a look at: Cisco UCS-C Series IMC CLI Configuration Guide or Cisco UCS-C Series IMC GUI Configuration Guide, search for Configuring the Power Restore Policy.
Hope this helps !!!
05-24-2021 01:53 AM
It is the default behaviour and can be changed in CIMC.
05-24-2021 04:36 AM
Hi @s.rashid ,
as @Leo Laohoo said ... please take a look at: Cisco UCS-C Series IMC CLI Configuration Guide or Cisco UCS-C Series IMC GUI Configuration Guide, search for Configuring the Power Restore Policy.
Hope this helps !!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide