ise auth policy

[bluesea2010]

Hi,

I have cisco wlc  now I want to add aruba AP'S in a location whrere  there is no cisco AP'S 

dot1x auth is  authentication policy and  authorization policies  are there  in ise .

(in the above  policy we have not specifiy the ssid name anywhere)

Now I want to   do authentication and authorization policy for aruba ssid . 

In my authorization policy (for aruba )  I used  the  attributes  

" RADIUS:Called-Station-ID equals Test-SSID" (The autorizatin policy placed first in the authorization policy ) 

But when authnticating from Test-SSid , the autorization fails 

Thanks

[Damien Miller · Accepted solution]

You'll have to provide a lot more detail then what you have shared if you want us to help. Radius authentication for Aruba wireless does work with ISE, they both follow the standards. 

[thomas · Accepted solution]

Configure ISE 2.0 3rd Party Integration with Aruba Wireless