04-12-2016 01:41 PM - edited 03-10-2019 11:40 PM
Hi
We have an issue with ISE configuration backup. It is failing with following error message.
DB BACKUP FAILED : RMAN-03002: failure of transport tablespace command at 04/11/2016 23:13:39. Backup aborted
We are running ISE 1.3 with patch version 5.
02-14-2021 08:53 PM
Did you ever resolve this?
02-15-2021 05:04 AM
Hi @Adam Hinchliff ,
if you have a similar problem, try the following commands to get more info:
ise/admin# debug backup-restore all
ise/admin# show logging | inc backup-restore
Hope this helps !!!
02-15-2021 04:39 PM
02-15-2021 05:09 PM
please manually run the backup and check the results of the debug provided on my last post.
You will probably see more info about your issue.
Hope this helps.
02-16-2021 10:58 AM
Also, check your disk space for /opt via #show disks. I have had issues in the past with backups and opt being at or above 70%. Typically from experience you will need TAC to assist you if this happens to be an issue. Good luck & HTH!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: