cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

337
Views
0
Helpful
5
Replies
smano
Cisco Employee

ISE BYOD Single SSID issue with iOS 12.3

I am trying single SSID BYOD test with iPhone 12.3.1 at customer site for POC. The device gets stuck in PEAP after provisioning. If i manually kick the client off the WLC, it reconnects correctly with TLS. We have tried with WLC 8.2 and 8.8, ISE 2.3 patch 6. The client hits EAP_TLS policy after 5 mins. We would like to see the device gets switch to TLS method as soon as BYOD registration is done. Do anyone had experienced it? 
 
 
 
1 ACCEPTED SOLUTION

Accepted Solutions
howon
Cisco Employee
5 REPLIES 5
Jason Kunst
Cisco Employee

Yes there is a bug for this from Apple side not switching the method. I will get this tomorrow.

Hi Jason, 

 

By any chance do we know whats the ETA for this bug fix? 

This is an apple issue, we have no control over this, please follow through and attach to TAC case for the defect on that page. I updated them all
howon
Cisco Employee
smano
Cisco Employee

Thank you @howon and @Jason Kunst 

Content for Community-Ad