cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
cancel
1663
Visitas
0
ÚTIL
3
Respuestas

ISE compatibility with 3com/H3C switches

atapiafl@cisco.com
Cisco Employee
Cisco Employee

Hello team,

 

Does ISE support wired access control, automatic dacl/vlan config, authentication, etc with 3rd party switches, mainly 3com 5500 G and H3C 5500??

 

How do you suggest to do that?

 

Thanks!

1 SOLUCIÓN ACEPTADA

Soluciones aceptadas

Francesco Molino
VIP Alumni
VIP Alumni
Hi

This is something you need to try when it comes to 3rd party vendor.
You have these links:
- https://community.cisco.com/t5/security-documents/ise-third-party-nad-profiles-and-configs/ta-p/3648719

- https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/compatibility/b_ise_sdt_24.html#thirdpartyaccessswitches

The way to implement things will depend on what you can on your switches. It would be good to talk with their tac in addition to testing you'll do.

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

Ver la solución en mensaje original publicado

3 RESPUESTAS 3

Francesco Molino
VIP Alumni
VIP Alumni
Hi

This is something you need to try when it comes to 3rd party vendor.
You have these links:
- https://community.cisco.com/t5/security-documents/ise-third-party-nad-profiles-and-configs/ta-p/3648719

- https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/compatibility/b_ise_sdt_24.html#thirdpartyaccessswitches

The way to implement things will depend on what you can on your switches. It would be good to talk with their tac in addition to testing you'll do.

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

vncnt
Level 1
Level 1

Hi,

 

https://community.cisco.com/t5/identity-services-engine-ise/ise-2-4-patch-4-amp-hp-h3c-comware-5-basic-dot1x/m-p/3761950

 

I got some troubles to make basic DOT1X with H3C 5500, I advice you to run tests in lab / poc / ...

Cheers