11-26-2012 12:05 AM - edited 03-10-2019 07:49 PM
Can Cisco ISE configured with Port Channel / EtherChannel.
Some one who have tried this?
Solved! Go to Solution.
11-26-2012 05:22 AM
No, unfortunately not.
11-26-2012 05:22 AM
No, unfortunately not.
11-26-2012 11:34 PM
ISE comes in Virtualized Packages as well. The ESX platform can be setup with port-channels which makes the link to the virtual machines redundant.
11-26-2012 11:37 PM
It was 3395 appliance that I would join Nexus in a Trunk
11-28-2012 01:28 AM
On the appliance you can't use etherchannel or trunk on the interfaces, also all service are not exposed on all interfaces, only Eth0 has all features running.
03-11-2015 01:15 PM
Hi all,
Any update on this topic 2 years later?
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide