cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

4272
Views
0
Helpful
5
Replies
Rene Rolsted
Beginner

ISE design - portchannel/EtherChannel

Can Cisco ISE configured with Port Channel / EtherChannel.

Some one who have tried this?

1 ACCEPTED SOLUTION

Accepted Solutions
jan.nielsen
Rising star

No, unfortunately not.

View solution in original post

5 REPLIES 5
jan.nielsen
Rising star

No, unfortunately not.

csco
Beginner

ISE comes in Virtualized Packages as well. The ESX platform can be setup with port-channels which makes the link to the virtual machines redundant.

It was 3395 appliance that I would join Nexus in a Trunk

On the appliance you can't use etherchannel or trunk on the interfaces, also all service are not exposed on all interfaces, only Eth0 has all features running.

ajc
Rising star
Rising star

Hi all,

 

Any update on this topic 2 years later?

 

thanks

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars


Miss a previous ISE webinar?
Never miss one again!

CiscoISE on YouTube